TurtleBot 2 - Complete Kit

Be the first to review this product

Availability: In stock

From: $1,499.00

To: $2,229.00

Price as configured: $999.00

Quick Overview

Complete TurtleBot 2 Open-source robot development kit


NOTE: Lead time for the Turtlebot 2 is approximately one week


Orders will be filled in the order they are received. However, if you have an urgent order please contact sales for more information.

The TurtleBot 2 from I Heart Engineering comes with:


  • Handy Quick Start Guide

  • Connector Kit to connect your laptop and Kinect or ASUS sensor

  • Attractive canvas pouch to store cables and accessories

  • Laptop and cable management straps

Front view

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Front view
  • Rear view
  • Connector Kit
  • Kit Bag
  • Kit Bag and Accessories
  • Quick Start Guide

* Required Fields

Price as configured: $999.00

Details

The TurtleBot 2 is the next generation TurtleBot Open-source robot development kit designed from the wheels up as a platform to build your next robotics project. This kit includes everything you need to get started building apps on wheels.

NOTE: Lead time for the Turtlebot 2 is approximately one week

Orders will be filled in the order they are received. However, if you have an urgent order please contact sales for more information.

Features

  • Mounting plates compatible with metric (M4) fasteners
  • Onboard laptop power interface allows laptop to charge while docked
  • High resolution wheel encoders and integrated gyro provide improved pose estimation
  • Accessible power connections probide 5V@1A, 12V@1.5A, and 12V@5A
  • Expansion connector
  • Lithium-Ion 2200 mAh Battery
  • RoHS Compliant

Includes

  • Kobuki Mobile Platform
  • TurtleBot 2 - Laser Cut Plates
  • TurtleBot 2 - Base Standoff Set
  • TurtleBot 2 - Small Parts
  • TurtleBot 2 - USB Installer

Kobuki Functional Specification

  • Maximum translational velocity: 65 cm/s
  • Maximum rotational velocity: 180 deg/s (>110 deg/s gyro performance will degrade)
  • Payload: 5 kg (hard floor), 4 kg (carpet)
  • Cliff: will not drive off a cliff with a depth greater than 5cm
  • Threshold Climbing: climbs thresholds of 12 mm or lower
  • Rug Climbing: climbs rugs of 12 mm or lower
  • Expected Operating Time: 3/7 hours (small/large battery)
  • Expected Charging Time: x/x hours (small/large battery)
  • Docking: can perform docking within a 2mx5m area in front of the docking station

Kobuki Hardware Specification

  • Motor Overload Detection : disables power to motors on detecting high current
  • Odometry: 52 ticks/enc rev, 2578.33 ticks/wheel rev, 11.7 ticks/mm
  • Gyro: factory calibrated, 1 axis (110 deg/s)
  • Bumpers: left, center, right
  • Cliff sensors: left, center, right
  • Wheel drop sensor: left, right
  • Power connectors: 5V/1A, 12V/1.5A, 12V/5A
  • Docking recharging connector: 19V/2.1A
  • Expansion pins: 3.3V/1A, 5V/1A, 4 x analog in, 4 x digital in, 4 x digital out
  • Audio : several programmable beep sequences
  • Programmable LED: 2 x two-coloured LED
  • State LED: 1 x two coloured LED [blinking - charging, Green - high level, Orange - low level]
  • Buttons: 3 x touch buttons
  • Battery: Lithium-Ion 2200 mAh (small) 4400 mAh (large)
  • Firmware upgradeable: via usb
  • Sensor Data Rate: 50Hz
  • Recharging to batteries only (jack) batteries & laptop @2.1A (docking)
  • Docking IR Receiver: left, center, right

Additional Information

Country of Manufacture

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.